A13-OLinuXino  

A13-OLinuXino - Open Source Hardware Board
A13-OLinuXino - Open Source Hardware Board A13-OLinuXino - Open Source Hardware Board
Embedded Linux computer with A13 SOC 512MB RAM

Select Product Variant

  • A13-OLinuXino
  • A13-OLinuXino-n8GB
  • A13-OLinuXino-WIFI
Price30.00 EUR
10 - 49 pcs28.50 EUR
50 - 10000 pcs27.00 EUR
In Stock
A13-OLinuXino is OSHW certified Open Source Hardware with UID BG000036

A13-OLinuXino is a low-cost single-board Linux computer in a compact nano-ITX form. It uses the very first Cortex A8 processor available in the eLQFP176 package, produced by Allwinner Technology Inc A13.

A13-OLinuXino is produced in two versions. A13-OLinuXino-WIFI has everything what A13-OLinuXino had plus 4/8GB NAND Flash and USB-to-WIFI adapter which allows wireless connectivity

FEATURES

  • A13 Cortex A8 processor at 1GHz, 3D Mali400 GPU
  • 512 MB RAM (2 x 256Mbit x 8)
  • 4/8GB NAND Flash (for A13-OLinuXino-WIFI)
  • 6-16VDC input power supply, noise immune design
  • 3 + 1 USB hosts, 3 available for users, 1 leads to onboard pinout or to WIFI module (for A13-OLinuXino-WIFI)
  • 1 USB OTG which can power the board
  • SD-card connector for booting optional Linux images
  • VGA video output
  • Battery option and connector
  • LCD signals available on connector so you still can use LCD if you disable VGA/HDMI
  • Audio output
  • Microphone input
  • 4 Mount holes
  • RTC PCF8563 on board for real time clock and alarms
  • 5 Keys on board for android navigation
  • UEXT connector for attaching expansion boards (sensors, relays, etc)
  • GPIO connector with 68/74 pins and these signals:
    • 17 for adding NAND flash;
    • 22 for connecting LCDs;
    • 20+4 including 8 GPIOs which can be input, output, interrupt sources;
    • 3x I2C;
    • 2x UARTs;
    • SDIO2 for connecting SDcards and modules;
    • 5 system pins: +5V, +3.3V, GND, RESET, NMI
  • Dimensions: (120x120)mm ~ (4.7x4.7)''

SOFTWARE

COMMUNITY

FAQ

  • What software is available for the board?
  • The software images that we provide and maintain are: Debian Linux for microSD card; Android for microSD card; Android for NAND memory (if your board has NAND). The board is able to run a lot of other custom-made Linux distributions. Please visit the WIKI and the GitHub pages of A13-OLinuXino to find latest images we officially provide and also links to 3rd party Linux images.
  • There is no Android on the NAND memory! The boards with NAND used to have Android already loaded! What happened?
  • We no longer load Android on the NAND memory of the boards. You can upload Android following the FAQ section of the wiki article of your board.
  • I bought A13-LCDxx but when I connect it to the A13-OLinuXino I receive no image on the display. What do I do wrong?
  • The default A13-OLinuXino image is set for a VGA display and 800x600 resolution. To use LCD with A13-OLinuXino you need to upload a new image with the appropriate settings. The download links for the images may be found in the wiki article for A13-OLinuXino: https://www.olimex.com/wiki/A13-OLinuXino
  • What is the operating temperature range of A13-OLinuXino?
  • The board works in the commercial temperature range 0+70C
  • How long this board will be available?
  • This board will be available forever