A13-LCD43TS  

A13-LCD43TS - Open Source Hardware Board
A13-LCD43TS - Open Source Hardware Board A13-LCD43TS - Open Source Hardware Board
4.3'' LCD screen with backlight and resistive touch screen panel, compatible with A13-OLinuXino and iMX233-OLinuXino

This item is OBSOLETE

OBSOLETE product please use LCD-OLinuXino-4.3TS

A 4.3'' LCD display with touch screen panel, compatible with Olimex Allwinner and Olimex iMX233 development boards and suitable for Linux video output

FEATURES

  • TFT Panel Features:
  • Construction: 4.3” a-Si color TFT-LCD, White LED / CCFL Backlight and PCB.
  • Resolution (pixel): 480(R.G.B) X272
  • Connector for touch screen
  • Interface: 40 pin pitch 0.5 FFC
  • Power supply voltage: 3.3V single power input. Built-in power supply circuit.
  • Viewing Direction:6 o’clock (the wide angle makes it hard for the image to be discolored)

SOFTWARE

Please check the OLinuXino wiki articles which contain suitable Linux images for the 4.3'' display.

FAQ

  • I bought A13-LCD4.3TS but there is no ready Android for it. Where can I find it?
  • The display is too small to be used with our latest Android releases. Please either use Debian or get a 7'' or 10'' inch display.
  • I bought A13-LCD4.3TS but when I connect it to the A13-OLinuXino I receive no image on the display. What do I do wrong?
  • The default A13-OLinuXino image is set for a VGA display and 800x600 resolution. To use LCD with A13-OLinuXino you need to run a configuration script. More information might be found here: https://www.olimex.com/wiki/A13-OLinuXino
  • I bought A13-LCD4.3TS and the SD card that has Linux image written on it. However the resolution I see on my VGA/LCD is not correct. What am I missing?
  • You would need to run a configuraiton script as explained in the wiki article for the respective board