LCD-OLinuXino-10 - Open Source Hardware Board
LCD-OLinuXino-10 - Open Source Hardware Board LCD-OLinuXino-10 - Open Source Hardware Board
10-inch LCD display suitable for OLIMEX Allwinner boards

Select Product Variant

  • LCD-OLinuXino-10
  • LCD-OLinuXino-10TS
Price75.00 EUR
10 - 49 pcs67.50 EUR
50 - 10000 pcs60.00 EUR
In stock

A 10" LCD display, compatible with Olimex A10, A13, A10s, A20, A64 Allwinner development boards which have either 0.1" or 0.05" or ribbon LCD connector. Suitable for Linux and Android video output.

LCD-OLinuXino-10 is a 1024x600 pixel LCD display compatible with  A10, A13, A10s, A20 and A64 OLinuXino boards. LCD-OLinuXino-10TS has a resistive touch panel (compatible with A10, A13, A10s, A20 boards; the A64 chip has no support for resistive touch panels)


  • 10" WSVGA (V:1024 lines, H:600 pixels) display
  • LED light-bar backlight system (9 parallel 3 serial)
  • Resistive touch screen (only in LCD-OLinuXino-10TS)
  • 16 200 000 colors
  • Can be powered by the host board or externally
  • DC-DC for LCD backlight
  • 40 pin 0.1" and 0.05" connectors for direct connection to OLinuXino boards
  • FR-4, 1.5 mm, red soldermask, component print
  • Dimensions: (222 x 143)mm ~ (8.74 x 5.63)"
  • Note that the cable to connect to your board is sold separately


  • Which boards can be used with LCD-OLinuXino-10?
  • OLinuXino boards that carry the OLinuXino or SOM name and have an LCD connector would work with the LCD-OLinuXino-10. Unlike the previous iteration of displays, the LCD-OLinuXino-10 has both 0.1'' connector and 0.05'' connector on its back. This allows the easy connection of boards with big LCD connector and also of boards with small LCD connector (like the LIME boards). You only need a single 40-40 cable with the same step on both sides to connect between the LCD and the board. Please note that the ten inch display is not recommended for A13 OLinuXino since the board migth lack the required computing power (especially under Android).
  • I bought LCD-OLinuXino-10 but when I connect it to the A20-OLinuXino I receive no image on the display. What do I do wrong?
  • The default A20-OLinuXino image is set for a HDMI display and 720p resolution. To use LCD with A20-OLinuXino you need to set proper display settings. Explanation of how to do it via the default script might be found in the wiki article for A20-OLinuXino:
  • I bought LCD-OLinuXino-10 and the SD card that has Linux image written on it. However the resolution I see on my VGA/LCD is not correct. What am I missing?
  • You would need to change the configuration file via the ./change_display* (press "TAB" for auto-complete) script. Detailed information might be found at the wiki article of your OLinuXino board.