DUINOMITE-eMEGA  

DUINOMITE-eMEGA - Open Source Hardware Board
DUINOMITE-eMEGA - Open Source Hardware Board DUINOMITE-eMEGA - Open Source Hardware Board DUINOMITE-eMEGA - Open Source Hardware Board
Open Source Hardware MAXIMITE basic computer with ARDUINO like layout
Price39.95 EUR
10 - 49 pcs35.96 EUR
50 - 10000 pcs31.96 EUR
In stock

DuinoMite is a Maximite Compatible Basic computer, originally designed by Geoff Graham, with additional features and Arduino like layout. DuinoMite allow you to program in BASIC language and have VGA and Keyboard interface, so you can develop and write your code in Basic without the need of any computer. You can store your code on the SD-CARD and to execute it on power up through autoexec.bas main code.

Note: The BASIC language support for this board is limited. We recommend that you use C to be able to explore all of the features of the board. Find out more about the Duinomite-Maximite story here:eMEGA BASIC troubles

FEATURES

  • PIC32MX795L microcontroller
  • 100 Mbit Ethernet
  • PMP fast GPIO up to 80Mhz input/output
  • 2MB on board FLASH DRIVE
  • 64KB EEPROM memory
  • Micro SD card
  • USB OTG which allow it to act both as Host and Device, so it can accept Android ADK, Printers, Cameras, Keyboards, Mouses, etc USB devices.
  • VGA connector
  • Composite Video connector
  • CAN driver and connector - note: CAN driver works on 5V and will not working when board is powered by Li-ion battery
  • RS232 driver and connector
  • Two UEXT connectors allowing Olimex modules to be connected one inside the box, and one outside the box
  • PS-2 keyboard connector
  • Audio output connector
  • Arduino like format, i.e. can work with Arduino shields

DOCUMENTS

SOFTWARE

COMMUNITY

DUINOMITE PROJECTS

WARNING

Do not use the "programmer-to-go" button when there is no image on the OLIMEX PIC-KIT3 or MICROCHIP PIC-KIT3 because that might put your microcontroller in an irrecoverable state. We have tested the mentioned scenario and we can confirm it destroys PIC32 chips (using both our and the original Microchip PICKIT3). We don't take responsibility if you break your chip that way. For more info check the following: www.microchip.com/forums/m635420.aspx.