A13-LCD10TS  

A13-LCD10TS - Open Source Hardware Board
A13-LCD10TS - Open Source Hardware Board A13-LCD10TS - Open Source Hardware Board A13-LCD10TS - Open Source Hardware Board
10-inch LCD display with resistive touchscreen panel suitable for and tested with Allwinner OLinuXino boards

This item is OBSOLETE

N/AEUR

This product is replaced by LCD-OLinuXino-10TS

A generic 10 inch display with WSVGA resolution and resistive touch screen panel. Has a connector compatible with Allwinner OLinuXino boards (cable is sold separately).

FEATURES

  • 10'' WSVGA (V:1024 lines, H:600 pixels) display
  • LED light-bar backlight system(9 parallel 3 serial)
  • 16 200 000 colors
  • Resistive touch-screen panel
  • Can be powered by the host board or externally
  • DC-DC for LCD backlight
  • 40 pin connector for direct connection to OLinuXino boards
  • Testpads for easy diagnostic
  • FR-4, 1.5 mm, red soldermask, component print
  • Dimensions:222x143mm (8.74 x 5.63")

FAQ

  • Which boards can be used with A13-LCD10TS?
  • Olimex OLinuXino boards with proper 40-pin LCD connector (A20, LIME via adapter, etc). The ten inch display is not recommended for A13 OLinuXino since it migth lack the computing power
  • I bought A13-LCD10TS but when I connect it to the A20-OLinuXino I receive no image on the display. What do I do wrong?
  • The default A20-OLinuXino image is set for a HDMI display and 720p resolution. To use LCD with A20-OLinuXino you need to set proper display settings. Explanation of how to do it via the default script might be found in the wiki article for A20-OLinuXino: https://www.olimex.com/wiki/A20-OLinuXino-MICRO
  • I bought A13-LCD10TS and the SD card that has Linux image written on it. However the resolution I see on my VGA/LCD is not correct. What am I missing?
  • You would need to change the configuration file via the ./change_display* script. Detailed information might be found at the wiki article of your OLinuXino board.