≡
Products Price List

A33-OLinuXino  

A33-OLinuXino - Open Source Hardware Board
A33-OLinuXino - Open Source Hardware Board A33-OLinuXino - Open Source Hardware Board
Embedded Linux Computer with A33 Quad Core ARM 1GB RAM

Select Product Variant

  • A33-OLinuXino
  • A33-OLinuXino-n8G
Price40.00 EUR
10 - 49 pcs36.00 EUR
50 - 99 pcs32.00 EUR
100 - 999 pcs30.00 EUR
1000 - 10000 pcs28.00 EUR
In stock
A33-OLinuXino is OSHW certified Open Source Hardware with UID BG000041

A33-OLinuXino is Open Source Hardware single board computer with A33 Quad core Cortex-A7 processor, Mali 400 GPU, OpenGL ES 2.0, RGB/LVDS, MIPI DSI interface for up to 1280x800 resolution displays, 5M/8M pixel CSI, HI-FI 100 dB Audio Codec.

FEATURES

  • A33 Quad Core Cortex-A7 running at 1.2Ghz
  • 1GB DDR3 RAM running at clock 432/360MHz
  • USB On-The-Go interface on USB mini connector
  • AXP223 PMU
  • Debug UART connector
  • LiPo battery charger
  • Step-up converter allow all peripherals including USB hosts to work properly on Li-Po battery power
  • Audio input for microphone
  • Audio output for headphones
  • Camera CSI / LCD MIPI  40 pin FPC connector
  • LCD 0.1" step 40 pin connector (not assembled on board)
  • GPIO 0.1" step 40 pin connector (not assembled on board)
  • Barrel power jack for external 5V supply
  • PCB dimensions: 66 x 71 mm

DOCUMENTS

HARDWARE

SOFTWARE



FAQ

  • Can I have the LCD or/and the GPIO male or female connectors soldered?
  • Yes, this is possible for minimum order of 50 pcs. Contact us for quote.
  • Can I use your LCD displays with this board?
  • Yes, but only the 4.3", 7", 10" displays. The resistve touchscreens would not work since the A33 chip supports only capacitive touchscreens.
  • What is the typical power consumption?
  • Around 110mA idle, when using the official Linux images and powering the board with 5V via the barrel power jack
  • Do you have a ready configuration for your displays?
  • Yes. All Olimex-made LCDs are supported.