New Products
USB-4SERIAL USB 2.0 HIGH SPEED TO FOUR RS232 OR 3.3V TTL LEVEL SERIAL UARTS AND ONE RS485 CURRENT LOOP SERIAL PORT
Linear Motor 55 mm with ball screw bearing
LINEAR MOTOR with ball screw bearing 327mm length
Allwinner released new Nine-core 12 nm A733 SOC with Dual core Cortex-A76, Hexa-Core ARM Cortex-A55 and RISC-V E902 and 3TOPS NPU
Allwinner was lagging behind other SOC vendors by offering higher performance ARM Cortex cores and their most powerful SOC had only A53 and A55 cores. They recently announced their new high performance A733 SOC which is with Nine cores inside. Two cores Cortex-A76, Hex cores A55, one core RISC-V E902. Also image processor and NPU […]
PICO2-XL and PICO2-XXL are Open Source Hardware boards with RP2350B and offering 48 GPIOs available, 2-16MB Flash, 0-8MB PSRAM, SD-card, USB-C and 2A 3.3V power supply
Raspberry Pi PICO2 is great, but we decided to make our own version with some improvements: This is how GPIOs are arranged: they are grouped in 6 groups x 8 signals with +3.3V and GND As you can see we have one row with power supply, debug and QSPI signals also exposed. The distance between […]
USB-SERIAL-L is Open Source Hardware and the world’s most sophisticated USB to serial converter
USB-SERIAL-L is not yet another USB to Serial converter. It comes with few nice features: Dimensions are only 35x35x8 mm. USB-SERIAL-L is available on our web for ordering and cost EUR 9.95
The new Open Source Hardware Dual core RISC-V ESP32-P4-DevKit prototypes are alive
ESP32-P4 is the Espressif’s new dual core 400Mhz RISC-V processor with 768KB internal RAM, 16/32MB PSRAM. The ESP32-P4-DevKit was announced here and is our first board with this new microcontroller. It has these features: First prototypes are assembled and everything almost work correctly 😉 For programming and debugging we setup VScode with Espressif EDF extension.When […]
