New Products
GT2 timing belt width 6mm closed loop length 400mm
Hardened Stainless Steel rod 8mm diameter and 500 mm length for linear guide
Do It Yourself Prusa i3 - 3D Printer
Let the RP2040-PICO-PC fun begin!
This is update to our previous post about RP2040-PICO. We have had the RP2040-PICO-PC prototypes for more than week and have tested all of its peripherals. It’s amazing what amount of code the Raspberry Pi community generated for such a short time after the launch of RP2040-PICO. Video, USB keyboard, SD-card storage, Audio, all tested […]
New Quad Core Cortex-A53 System-On-Module supports DDR3/DDR3L/DDR4 memories from 1 up to 4GB
Our RK3328-SOM prototypes are testing now. These are with dimensions of only 55 x 41 mm. RK3328 SOC has: 4x Cortex-A53 cores @1.5Ghz DDR3/DDR3L/DDR4 support 1/2/4GB GPU: ARM Mali-450MP2 HDMI 2.0 CSI up to 5Mpix Video decode H.264 H.265 4K@60Hz Video encode H.264 H.265 1080p@30Hz Audio: I2S, Codec Gigabit 10/100/1000 Ethernet Megabit 10/100 Ethernet with […]
RP2040-PICO-PC small computer made with the Raspberry Pi RP2040-PICO module first prototypes are ready
These who follow our account in Twitter know our small teaser posted on March 1st. It’s small base board for RP2040-PICO the $4 module with the Cortex-M0+ processor made by Raspberry Pi foundation. We were ready with the prototype for a long time but the RP2040-PICO modules were tricky to source 🙂 Raspberry Pi suffer […]
Allwinner plans to release Linux capable RISC-V SOC this year
Searching for more info about their new H313 SOC I found old news from August 2020, where Allwinner announce the development of AP SOC with RISC-V and praising Open Source Hardware and the open ISA of RISC-V. They say in this announcement that they will have AP (application processor) SOC with RISC-V in 2021! There […]
