New more compact design of ARM-USB-OCD-H(L) is released with USB-C connector

Published: Wed, 16 Mar 2022 15:34 | Comments: 1
New more compact design of ARM-USB-OCD-H(L) is released with USB-C connector

ARM-USB-OCD-H is very popular OpenOCD debugger supported by almost all IDEs and platforms. It’s in the Application notes of Intel and ARM processor vendors. The ARM-USB-OCD-H initial design was made many years ago and some parts are obsolete like the USB-B to USB-A cable, big plastic shell from centronic 36/36 connectors etc. As the centronic […]

More...


Metal Frames for our capacitive touchscreen 7 and 10 inch LCDs are in stock!

Published: Thu, 3 Feb 2022 12:33 | Comments: 0
Metal Frames for our capacitive touchscreen 7 and 10 inch LCDs are in stock!

The popular LCD7-METAL-FRAME and LCD10-METAL-FRAME are made for resistive touch panel LCD-OLinuXino-7TS and LCD-OLinuXino-10TS LCDs. Our LCD-OLinuXino-7CTS and LCD-OLinuXino-10CTS couldn’t be used with the metal frames as their touch panel area is different from that of the resistive touch panels. These metal frames are made for very looking industrial panels and we had many requests […]

More...


iMX8MPlus-SOM is alive and boots!

Published: Tue, 25 Jan 2022 12:44 | Comments: 4
iMX8MPlus-SOM is alive and boots!

This board development started in April 2021 and finished August 2021 but the semiconductor shortages didn’t allow us to test the prototypes until recently. We assembled 4 boards and all theyare alive and boot. The features are: MIMX8ML8DVNLZAB – Quad Core Arm Cortex-A53 running at 1.8Ghz with Arm Cortex-M7 co-processor running at 800Mhz and 2.3 […]

More...


FOSDEM 2022 will be online event on February 5th and 6th

Published: Tue, 25 Jan 2022 12:25 | Comments: 1
FOSDEM 2022 will be online event on February 5th and 6th

The biggest Free Libre Open Source Software and Open Source Hardware event in Europe – FOSDEM 2022 will be again online on February 5th and 6th. Check the devrooms and mark the talks you want to attend. My talk will be in Computer Aided Modeling and Design devroom and I will speak about how we […]

More...