COVID-19 quarantine projects to try with eduArdu while at home :)

Published: Wed, 8 Apr 2020 11:28 | Comments: 0
COVID-19 quarantine projects to try with eduArdu while at home :)

Keep social distance while drinking with friends 🙂 No this is not an eduArdu project, but it is still fun to implement. The eduArdu Social Distance project is using the onboard Ultra sound distance meter and beeps with its buzzer when someone comes closer than 1.5 meters from you. The eduArdu Infrared Thermometer project uses […]

More...


New NB-IoT-BC66 modules with size only 26×26 mm contain everything you need to add NB-IoT functionality in your next project

Published: Tue, 7 Apr 2020 13:52 | Comments: 1
New NB-IoT-BC66 modules with size only 26×26 mm contain everything you need to add NB-IoT functionality in your next project

NB-IoT is low power wide area networking technology which uses existing GSM LTE technology and has many advantages versa LoRa: GSM network quality of service single GSM cell can talk to up to 100 000 devices high communication speed 25.5 kbps up and downlink secure communication using LTE encryption better range than LoRa both in […]

More...


Open Source Hardware IoT boards ESP32-EVB and ESP32-GATEWAY now are available in industrial grade -40+85C

Published: Fri, 3 Apr 2020 14:06 | Comments: 2
Open Source Hardware IoT boards ESP32-EVB and ESP32-GATEWAY now are available in industrial grade -40+85C

ESP32-EVB and ESP32-GATEWAY are two very popular IoT boards which are supported both by Arduino IDE and Espressif SDK. Now we stock ESP32-EVB-IND and ESP32-GATEWAY-IND which are functionally same boards, but all components used in them work in industrial temperature grade -40+85C.

More...


ESP32-WROVER-DevKit-Lipo Open Source Hardware board with 4MB Flash and 8MB PSRAM is in stock

Published: Thu, 2 Apr 2020 13:35 | Comments: 0
ESP32-WROVER-DevKit-Lipo Open Source Hardware board with 4MB Flash and 8MB PSRAM is in stock

ESP32-WROVER-DevKit-LiPo is new open source hardware board which uses ESP32-WROVER modules with 4MB Flash and 8MB PSRAM.  It keeps same layout as ESP32-DevKit-C and ESP32-DevKit-Lipo, so boards made for these modules will work drop in. The only difference between ESP32-WROOM and ESP32-WROVER modules beside the more RAM is that WROVER module has no GPIO16 and […]

More...