Started by jwischka, December 17, 2012, 06:36:15 AM
Quote from: maurosk on January 17, 2013, 05:39:38 PMYes i know this, but your kernel is good, it need just ethernet mod.. i try to recompile my own kernel, but it isn't good like yours, that's why i want to recompile yours
Quote from: maurosk on January 17, 2013, 05:57:51 PMThanks jwischka, i hope to return the favor
Quote from: jwischka on January 17, 2013, 05:54:20 PMAdding various usb support as a module. Recompiled, rebuilding, updating, and will re-upload.
Quote from: leo on January 17, 2013, 06:00:51 PMQuote from: jwischka on January 17, 2013, 05:54:20 PMAdding various usb support as a module. Recompiled, rebuilding, updating, and will re-upload.Or just send him your .config Even with a new kernel he needs the kernel sources to build the asix module against it.
Quote from: Ekkehard on January 17, 2013, 06:08:44 PMYup - I'll second that motion. Would be a shame if we all had to re-invent the wheels that jwischka has already invented AND trued so beautifully :-) For starters, a .config file would be much appreciated.Taken care of - you guys are just too fast for me :-)And yes, ASIX Electronics is the manufacturer of chip that's in my Ethernet adapter (SABRENT NT-USB20) as well.
Quote from: atal on January 18, 2013, 02:43:14 PMHello guys,I have here A13 and I cannot successfully login into system. I prepared SD card with your R5 system. No problem, after power up the kernel start and then I am prompted to insert username/password in console. But when I enter olinuxino/olinuxino then there is flashed very quickly welcome text "...ABSOLUTLY NO WARRANTY, etc" and then the screen is cleared and I see just login prompt again (debian login:).Do you have any advice how to solve this my problem? I tested two 4GB SDcard with my coleague for sure, but same trouble. Basic Debian system without X from your website I have successfully tested with 2GB SDcard - login and using system in console without problems. VGA monitor is used. Jaromir