< IMX233
Revision as of 12:07, 6 May 2013 by Xxcn (talk | contribs) (The official image)

ArchLinuxARM on iMX233-OLinuXino

This page explains the ways to install ArchLinuxARM (alarm for short) on iMX233-OLinuXino boards. Instructions should work on all 3 variants: maxi, mini and micro.

The official image

The easiest way to install alarm: just follow the official instructions. The image is pre-partitioned and has everything in place. It uses bootlets, so any time the kernel cmdline or DT binary need to be changed the bootstream needs to be rebuilt and reflashed. It is essential that you hit "y" when asked "Do you want the new kernel flashed onto mmcblk0p1? [y|N]" when upgrading the kernel or installing a custom kernel package. U-Boot makes the board much more hacker-friendly.

U-Boot enabled install

Partition the SD card

Install the bootloader

Install the root filesystem