Difference between revisions of "A33-OLinuXino"

(Created page with "Features: *A33 Quad Core Cortex-A7 running at 1.2Ghz *1GB DDR3 RAM memory running at 432Mhz/360MHz *4GB NAND flash memory (only availabe in A33-OLinuXino-4GB) *USB-OTG *AXP22...")
 
Line 2: Line 2:
  
 
*A33 Quad Core Cortex-A7 running at 1.2Ghz
 
*A33 Quad Core Cortex-A7 running at 1.2Ghz
*1GB DDR3 RAM memory running at 432Mhz/360MHz
+
*1GB DDR3 RAM memory running at 432Mhz/360Mhz
*4GB NAND flash memory (only availabe in A33-OLinuXino-4GB)
+
*4GB NAND flash memory
*USB-OTG
+
*USB On-The-Go interface on USB mini connector
 
*AXP223 PMU
 
*AXP223 PMU
 
*Debug UART connector
 
*Debug UART connector
*LiPo battery charger
+
*Li-Po battery operation with buit-in charger
*Step-up converter allow all peripherals including USB hosts to work properly on Li-Po battery power
+
*Step-up converter allows all peripherals including USB hosts to work properly on Li-Po battery power
 
*Audio input for microphone
 
*Audio input for microphone
 
*Audio output for headphones
 
*Audio output for headphones

Revision as of 05:51, 26 September 2016

Features:

  • A33 Quad Core Cortex-A7 running at 1.2Ghz
  • 1GB DDR3 RAM memory running at 432Mhz/360Mhz
  • 4GB NAND flash memory
  • USB On-The-Go interface on USB mini connector
  • AXP223 PMU
  • Debug UART connector
  • Li-Po battery operation with buit-in charger
  • Step-up converter allows all peripherals including USB hosts to work properly on Li-Po battery power
  • Audio input for microphone
  • Audio output for headphones
  • Camera CSI / LCD MIPI 40 pin FPC connector
  • LCD 0.1" step 40 pin connector (not assembled on board)
  • GPIO 0.1" step 40 pin connector (not assembled on board)
  • Barrel power jack for external 5V supply
  • PCB dimensions: 66 x 71 mm