August 04, 2021, 06:52:53 pm

Bc66 usb dev board

Started by hammer5858, January 15, 2021, 10:54:05 pm

Previous topic - Next topic

hammer5858

On the site, it mentions that the bc66 dev with usb can achieve 126ua. However, I am only getting over 200ua in pure PDM mode using AT+QPOWD=0

Is this an error on the description?

LubOlimex

Did you enable power saving mode?

Check if it is enabled with:

AT+CPSMS?

If it is disabled make sure to enable it with something like:

AT+CPSMS=1,,,"01101010","00000101"
Technical support and documentation manager at Olimex