Text only | Text with Images

Olimex Support Forum

DUINO => ARDUINO => Topic started by: hammer5858 on January 15, 2021, 10:54:05 PM

Title: Bc66 usb dev board
Post by: hammer5858 on January 15, 2021, 10:54:05 PM
On the site, it mentions that the bc66 dev with usb can achieve 126ua. However, I am only getting over 200ua in pure PDM mode using AT+QPOWD=0

Is this an error on the description?
Title: Re: Bc66 usb dev board
Post by: LubOlimex on January 18, 2021, 08:19:11 AM
Did you enable power saving mode?

Check if it is enabled with:

AT+CPSMS?

If it is disabled make sure to enable it with something like:

AT+CPSMS=1,,,"01101010","00000101"
Text only | Text with Images