Welcome, Guest

Author Topic: MSP430F5510 programming  (Read 550 times)

paul0208

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
MSP430F5510 programming
« on: September 28, 2017, 07:36:47 AM »
Hi,

I got your MSP430-JTAG-TINY-V2 and olimexino-5510.
But, Olimex MSP430 programmer, downloaded from your site does not have MSP430F5510 on Device select menu.
How can I program your olimexino-5510 by olimex programmer?

BR
Paul 

LubOlimex

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1752
  • Karma: +46/-2
Re: MSP430F5510 programming
« Reply #1 on: September 28, 2017, 10:18:33 AM »
Not all devices supported by the firmware had been added to the drop-down menu of the software. You can add devices that are supported by the firmware, by editing olidev.ini. Add the following at the bottom:

:MSP430F5510    00008000    0000ffff    00001800    000019ff

Make sure you are using the latest firmware available. Download this package that has the latest firmware (dll files): https://www.olimex.com/Products/MSP430/JTAG/MSP430-JTAG-TINY-V2/resources/OLIMEX_MSP430-DLL_drivers.zip Make sure the files are placed in the install folder of the programmer software.

Refer to "Readme_MSPPORG.txt" in the main install folder of the programmer software for more information on adding additional devices to the drop-down menu.

You can find a list with all supported targets by the latest firmware here: https://www.olimex.com/Products/MSP430/JTAG/_resources/tiny-v2-supported-mcus.txt
Technical support and documentation manager at Olimex