Olimex Support Forum

Microcontrollers => MSP430 => Topic started by: paul0208 on September 28, 2017, 07:36:47 AM

Title: MSP430F5510 programming
Post by: paul0208 on September 28, 2017, 07:36:47 AM
Hi,

I got your MSP430-JTAG-TINY-V2 and olimexino-5510.
But, Olimex MSP430 programmer, downloaded from your site does not have MSP430F5510 on Device select menu.
How can I program your olimexino-5510 by olimex programmer?

BR
Paul 
Title: Re: MSP430F5510 programming
Post by: LubOlimex on September 28, 2017, 10:18:33 AM
Not all devices supported by the firmware had been added to the drop-down menu of the software. You can add devices that are supported by the firmware, by editing olidev.ini. Add the following at the bottom:

:MSP430F5510    00008000    0000ffff    00001800    000019ff

Make sure you are using the latest firmware available. Download this package that has the latest firmware (dll files): https://www.olimex.com/Products/MSP430/JTAG/MSP430-JTAG-TINY-V2/resources/OLIMEX_MSP430-DLL_drivers.zip Make sure the files are placed in the install folder of the programmer software.

Refer to "Readme_MSPPORG.txt" in the main install folder of the programmer software for more information on adding additional devices to the drop-down menu.

You can find a list with all supported targets by the latest firmware here: https://www.olimex.com/Products/MSP430/JTAG/_resources/tiny-v2-supported-mcus.txt