Started by jwischka, December 17, 2012, 06:36:15 am
Quote from: SlyCom on October 31, 2013, 12:30:44 amI cloned https://github.com/linux-sunxi/u-boot-sunxi.git and the first compilation finishing ok but if I make changes in config file and then try to recompile then having above errors.1) If I use your image without compilation then everything seems to be ok.2) The first compilation after cloned kernel from git is ok (see above). I can compile the proper full image and use it in my board.
Quote from: SlyCom on October 31, 2013, 12:41:13 pmSorry for late response but I had to confirm where is the problem.Yes, my mistake I mean: https://github.com/linux-sunxi/linux-sunxiIf I use original config files (linux-sunxi) then I'm able compile. If before any compilation I replace the original config file with yours config file then the compiler throws errors mentioned in my previous post.
Quote from: SlyCom on October 31, 2013, 07:18:57 pmThank you jwischka for help!Probably I would spend much more time without your help.If I add additional modules in kernel. Do I need modify/add the modules in my sdb2 partition (rootfs) or just amend the uImage in partition sdb1?
Quotewget: unable to resolve host address ...
Quote from: SlyCom on October 31, 2013, 08:37:59 pmI configured the network, the ip address has been assigned but have following error:Quotewget: unable to resolve host address ...Ping is not working.
QuoteFrom 192.168.0.10 icmp_seq=1 Destination Host Unreachable
Quote from: SlyCom on November 01, 2013, 09:15:53 amPinging to 188.8.131.52QuoteFrom 192.168.0.10 icmp_seq=1 Destination Host Unreachableafter restarting the network service I can ping to 184.108.40.206 (sometimes) but still can not use for example wget or apt-get update.Jwischka,Have you noticed that there are network drops more frequently in R19 than in R18?[EDIT]Sometimes when I'm restarting the network service it hangs and then have to use CTRL+C
Quote from: SlyCom on November 01, 2013, 02:55:35 pmyes, it's my image. So I made a mistake somewhere.
Quote from: SlyCom on November 01, 2013, 05:11:51 pmI'm using files from your image R19-beta. Just replaced the uImage.P.S.I asked before about NAND support. Have you considered using NAND instead sd card?