Started by lamda, September 17, 2013, 09:55:11 am
Quote3. How to use this demo To download the firmware to the board you need some sort of programmer/debugger compatible with the PIC32MX795F512L processor. Please note that ICD2 is not compatible with this processor. The fastest possible way to get things running is to download the precompiled hex file to the processor memory. The file needed is "PIC32-MAXI-WEB demo 1.03 Prebuilt.hex" in the root directory. Import this file in MPLAB/MPLABX and select processor PIC32MX795F512L. An alternative is to open the workspace (\PIC32-MAXI-WEB demo 1.03.mcw) in MPLAB, compile the projects inside (MainProgram project must be the last one because other generates library files used in it) and then debug the application. This sample workspace may also be your starting point in developing new applications using the board. Build info: IDE: MPLAB IDE v8.91 or MPLABX 1.80 Compiler: XC32 v1.21 Microchip Graphics Library v3.06 FreeRTOS v7.3.0 Debugger used: PICKit3 by MicrochipNOTE: Since there is no external memory on the board the data for network configurations is stored on the flash. So if you decide to edit the demo for your own project please check the address defined with APP_CONFIG_ADDRESS macro in the "HardwareProfile - PIC32MX795F512L PIM.h" file. Find a proper address where the data can be stored! Otherwise saving network configurations may cause errors during execution of your program!!!our program!!!