Welcome, Guest

Author Topic: temperature range  (Read 2312 times)

sicehardware

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
temperature range
« on: June 13, 2013, 06:31:23 PM »
Which is the temperature range of iMX233-OLinuXino-MAXI? i cant find this information on its datasheet.

Thanks in advance.

Madjidlho

  • Newbie
  • *
  • Posts: 20
  • Karma: +0/-0
Re: temperature range
« Reply #1 on: May 21, 2014, 12:09:34 PM »
Hello,

I'm restarting this question as i need the same information and there is no answer.

What is the temperature range of the imx233-olinuxino family please?


scout_3pm

  • Newbie
  • *
  • Posts: 24
  • Karma: +2/-0
Re: temperature range
« Reply #2 on: May 21, 2014, 02:09:41 PM »
From https://www.olimex.com/Products/OLinuXino/open-source-hardware

And this info is from the time they started - i.e iMX233-OLinuXino, it doesn't apply to the A10/A13/A20 .... there i think it is from 0-70C ;-)

Quote
OLINUXINO is Open Source software and Open Source Hardware, low cost EUR 30 Linux Industrial grade single board computer with GPIOs capable of operating at -25+85C.

Madjidlho

  • Newbie
  • *
  • Posts: 20
  • Karma: +0/-0
Re: temperature range
« Reply #3 on: May 21, 2014, 06:20:40 PM »
Yes indeed.

I'm asking because the ram used seems to be rated for 0-70°C. Have the imx233 boards been tested for -25 +85?

Madjidlho

  • Newbie
  • *
  • Posts: 20
  • Karma: +0/-0
Re: temperature range
« Reply #4 on: May 22, 2014, 12:51:06 PM »
Hmm ihave a doubt, i see on the schematics HY5DU121622D(L)T(P)-J but on the olinuxino nano board i read H5DU5162ETR-E3C, which is still commercial range (0-70).

scout_3pm

  • Newbie
  • *
  • Posts: 24
  • Karma: +2/-0
Re: temperature range
« Reply #5 on: May 22, 2014, 02:05:03 PM »
Write an e-mail to support@olimex.com ;-)

Madjidlho

  • Newbie
  • *
  • Posts: 20
  • Karma: +0/-0
Re: temperature range
« Reply #6 on: May 23, 2014, 12:01:10 PM »
I have an answer, contrary to what is said the version on the webstore is not industrial at all. If you want to order industrial ones you have to contact them and pay an extra 5€ per board with MOQ 50.

scout_3pm

  • Newbie
  • *
  • Posts: 24
  • Karma: +2/-0
Re: temperature range
« Reply #7 on: May 23, 2014, 12:56:44 PM »
Thanks for sharing. Good to know.