≡

Difference between revisions of "ArmbianHowTo"

(Created page with "==Changing display output== With current kernel version (4.13) changing display output must be done by recompiling u-boot. This is necessary because kernel supports only Simpl...")
 
m (→‎LCD)
Line 2: Line 2:
 
With current kernel version (4.13) changing display output must be done by recompiling u-boot. This is necessary because kernel supports only SimpleFB. This will change in the future.   
 
With current kernel version (4.13) changing display output must be done by recompiling u-boot. This is necessary because kernel supports only SimpleFB. This will change in the future.   
 
===LCD===
 
===LCD===
−
====Enabling touchscreen====
+
 
 +
====Enable touchscreen====
 
Create blacklist file:
 
Create blacklist file:
 
  # echo "blacklist sun4i_gpadc_iio" > /etc/modprobe.d/blacklist-touchscreen.conf
 
  # echo "blacklist sun4i_gpadc_iio" > /etc/modprobe.d/blacklist-touchscreen.conf
 
  # echo "blacklist sun4i_gpadc" >> /etc/modprobe.d/blacklist-touchscreen.conf
 
  # echo "blacklist sun4i_gpadc" >> /etc/modprobe.d/blacklist-touchscreen.conf
 +
 +
===Calibrate touchscreen===
 +
Install calibration package:
 +
# apt-get install xinput-calibrator
 +
 +
After completion start the program inside the X.
 +
Applications
 +
  -> System
 +
    -> Calibrate Touchscreen
 +
 +
You will see blank screen. Touch the display at the marks. Then store the calibration values.
 +
Create new file '''99-calibration.conf'''
 +
# cat > /etc/X11/xorg.conf.d/99-calibration.conf << __EOF__
 +
Section "InputClass"
 +
Identifier "calibration"
 +
MatchProduct "1c25000.rtp"
 +
Option "Calibration" "3930 108 348 3948"
 +
Option "SwapAxes" "0"
 +
EndSection
 +
__EOF__
 +
 +
Put the values from the calibrator program.
 +
 
===VGA===
 
===VGA===
 
===HDMI===
 
===HDMI===

Revision as of 00:33, 3 November 2017

Changing display output

With current kernel version (4.13) changing display output must be done by recompiling u-boot. This is necessary because kernel supports only SimpleFB. This will change in the future.

LCD

Enable touchscreen

Create blacklist file: 

# echo "blacklist sun4i_gpadc_iio" > /etc/modprobe.d/blacklist-touchscreen.conf
# echo "blacklist sun4i_gpadc" >> /etc/modprobe.d/blacklist-touchscreen.conf

Calibrate touchscreen

Install calibration package: 

# apt-get install xinput-calibrator

After completion start the program inside the X. 

Applications
  -> System
    -> Calibrate Touchscreen

You will see blank screen. Touch the display at the marks. Then store the calibration values. Create new file 99-calibration.conf 

# cat > /etc/X11/xorg.conf.d/99-calibration.conf << __EOF__
Section "InputClass"
	Identifier	"calibration"
	MatchProduct	"1c25000.rtp"
	Option	"Calibration"	"3930 108 348 3948"
	Option	"SwapAxes"	"0"
EndSection
__EOF__

Put the values from the calibrator program.

VGA

HDMI

Retrieved from "https://www.olimex.com/wiki/index.php?title=ArmbianHowTo&oldid=2940"