July 21, 2024, 11:45:23 PM

ESP32 POE placa

Started by Gianluca, June 25, 2019, 02:20:08 PM

Previous topic - Next topic


Hi we are using, device ESP32-POE for create device that use BLE and connection WIFI or LAN.
We use ESP32 with arduino-ide.

if use BLE wnd wifi BLE work well and acceot connection, if use BLE and LAN, BLE not accept connection.

Any one have the same problem?



This is a hardware limitation. ESP32 has only one radio and one antenna; using BT + WIFI at the same time would require software trickery. I recommend you to read this thread and focus on the replies of user "ESP_Sprite": https://esp32.com/viewtopic.php?t=6707
Technical support and documentation manager at Olimex