TMS320-JTAG - Parallel Port Emulator (XDS100pp)

Started by lacroix, September 04, 2013, 11:19:39 AM

Previous topic - Next topic

lacroix

This device not work with SOFTWARE Code Composer Studio 3.x and patch XDS100pp_Beta2.exe because this patch not update setup device. Anybody have normal patch? Or source code patch. For what patch, and the device itself, if it does not work?  >:(
Software:
Code_Composer_Studio_v3.3_Build_3.3.38.2_FET
CCS_v3.3_SR6_57.exe
XDS100pp_Beta2.exe

LubOlimex

Hello lacroix,

Did you follow the setup instruction over here: https://www.olimex.com/Products/DSP/Emulators/TMS320-JTAG/resources/How-to-use-TMS320F-P28016-board.pdf?

The software versions seem the exact ones we used during testing before.

Best regards,
Lub/OLIMEX
Technical support and documentation manager at Olimex

lacroix

Quote from: LubOlimex on September 04, 2013, 12:55:47 PM
Hello lacroix,

Did you follow the setup instruction over here: https://www.olimex.com/Products/DSP/Emulators/TMS320-JTAG/resources/How-to-use-TMS320F-P28016-board.pdf?

The software versions seem the exact ones we used during testing before.

Best regards,
Lub/OLIMEX
Yes.
Quote
You must select a configuration in Setup
before starting the Code Composer Studio IDE. Double-click on the Setup
CCStudio desktop icon.
I not see "TI XDS100pp Emulator". This element not showing in The System Configuration dialog box appears. This element must appear after the patch XDS100pp_Beta2.exe, yes? But this element not showing.

lacroix

Quote from: LubOlimex on September 04, 2013, 12:55:47 PM
Technical support and documentation manager at Olimex
Hello LubOlimex, maybe you have all elements for patch? And a list of items that changes/adds this patch? I will check whether all the actions carried out this patch.

lacroix


LubOlimex

Hello lacroix,

We don't have any sources for the patch unfortunately. The executable was provided by Texas Instruments.

I suggest you try later version of CCS 3 or contact TI with the question about the software.

Best regards,
Lub/OLIMEX
Technical support and documentation manager at Olimex

Walkerjhon

"TI XDS100pp Emulator" does not appear. This element does not appear in the System Configuration dialogue box. This element must appear after the XDS100pp Beta2.exe patch, correct? However, this element is not visible.

SAking

The patch XDS100pp Beta2.exe for SOFTWARE Code Composer Studio 3.x does not update the setup device, hence this device is incompatible. Anyone have a standard patch? patching the source code. If the patch is ineffective, what about the device itself?