Welcome, Guest

Author Topic: OTG-USB Port not working using stable Debian and mainline u-boot??  (Read 477 times)

njwuh1mll0

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
Devices plugged into the OTG-USB port on my Lime2 board aren't showing up at all.
I'm using a daily image of Debian u-boot and stable Debian 9.3... everything else seems to work fine.

JohnS

  • Hero Member
  • *****
  • Posts: 1674
  • Karma: +33/-45
Re: OTG-USB Port not working using stable Debian and mainline u-boot??
« Reply #1 on: February 07, 2018, 06:43:59 PM »
Report it to whoever built your Debian / provided the files.

It looks not to be the Olimex hardware :)

John

LubOlimex

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1752
  • Karma: +45/-2
Re: OTG-USB Port not working using stable Debian and mainline u-boot??
« Reply #2 on: February 08, 2018, 10:19:29 AM »
This is entirely possible when using newest software releases. If you need to use mainline kernel I recommend you to test with Armbian Debian server images for the board here: https://www.armbian.com/olimex-lime-2/

If you wish to have all the hardware working, and mainline kernel is not mandatory, consider our official images available at the wiki article: https://www.olimex.com/wiki/A20-OLinuXino-LIME2
Technical support and documentation manager at Olimex

njwuh1mll0

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
Re: OTG-USB Port not working using stable Debian and mainline u-boot??
« Reply #3 on: February 09, 2018, 05:24:42 PM »
I tried the official images and armbian and I got it to work in both, thank you.