Print Page - OTG-USB Port not working using stable Debian and mainline u-boot??

Title: OTG-USB Port not working using stable Debian and mainline u-boot??
Post by: njwuh1mll0 on February 07, 2018, 06:10:18 PM

Devices plugged into the OTG-USB port on my Lime2 board aren't showing up at all.
I'm using a daily image of Debian u-boot and stable Debian 9.3... everything else seems to work fine.

Title: Re: OTG-USB Port not working using stable Debian and mainline u-boot??
Post by: JohnS on February 07, 2018, 06:43:59 PM

Report it to whoever built your Debian / provided the files.

It looks not to be the Olimex hardware :)

John

Title: Re: OTG-USB Port not working using stable Debian and mainline u-boot??
Post by: LubOlimex on February 08, 2018, 10:19:29 AM

This is entirely possible when using newest software releases. If you need to use mainline kernel I recommend you to test with Armbian Debian server images for the board here: https://www.armbian.com/olimex-lime-2/

If you wish to have all the hardware working, and mainline kernel is not mandatory, consider our official images available at the wiki article: https://www.olimex.com/wiki/A20-OLinuXino-LIME2

Title: Re: OTG-USB Port not working using stable Debian and mainline u-boot??
Post by: njwuh1mll0 on February 09, 2018, 05:24:42 PM

I tried the official images and armbian and I got it to work in both, thank you.

Olimex Support Forum

OLinuXino Android / Linux boards and System On Modules => A20 => Topic started by: njwuh1mll0 on February 07, 2018, 06:10:18 PM