May 20, 2024, 11:30:22 AM

Olimex PIC32HMZ144

Started by Gosh, October 31, 2017, 07:10:21 PM

Previous topic - Next topic


Hi all.
Received target Board,I wanted to know if the bootloader is flashed to the processor.
Or need to buy PicKit3.
Thank you.



Congrats on your new board! PIC32-HMZ144 is a general-purpose development board. You need an ICSP programmer (or emulator or debugger). Notice that the on-board ICSP interface is available at a 6-pin (1×6) 0.1" step connector. If your programmer has another type of connector you might need an adapter like PIC-ICSP or similar.

This is also mentioned in chapter "1.2 MINIMAL BOARD USE REQUIREMENTS" in the user's manual here:

Best regards,
Technical support and documentation manager at Olimex