Started by jwischka, December 17, 2012, 06:36:15 AM
Quote from: aquarat on May 08, 2013, 12:23:40 AMAnybody have any idea how can I access the GPIOs ? (on the Pi it's under /sys/class/gpio/)
UMP:ump_arch_open() failed to open UMP device driverCould not initialize egl displayEGL errorAborded
Quote from: milimilimoy on May 22, 2013, 05:43:50 PMHi jwischka,Thank you for your work wich is very helpful to me.I'm actually working on a project on A13-OlinuXino-Wifi board. I compiled a Linaro Developper OS for the board and a QT GUI which automatically run at the boot. In order to optimize the boot time I'm trying to build Mali driver in the kernel and not to load it as a module.A saw that you did it since the R15 version and tried to use it with the R18 version. I installed the client driver using sunxi-mali with the config Code Select ExpandEGL_TYPE=framebuffer VERSION=r3p0 when I run the "test" example I got the next errorCode Select ExpandUMP:ump_arch_open() failed to open UMP device driverCould not initialize egl displayEGL errorAbordedIt is as if the kernel driver were not loaded. Do you have an idea of where I did a mistake ?I just precise that everything is working when I use mali as a module.Thank you very much in advanceMartin
Quote from: bobmelville on May 27, 2013, 04:36:50 AMUsing your R18 image and it looks quite nice.But, I want to use a Davicom DM9601 usb-ethernet adapter.There is a driver for this in my laptop Ubuntu machine, but not yourdistribution. Can you compile a driver for this device?Here is a link to the manufacturer's web site with source code:http://www.davicom.com.tw/page1.aspx?no=209814
auto eth0iface eth0 inet dhcp
Quote from: Ekkehard on June 26, 2013, 01:17:07 AMlong time no activity here - am I still at the right place? Love the R18 build! Works like a charm - running apache and all for me...@bobmelville: I know, this is a late response, but did you put the linesCode Select Expandauto eth0iface eth0 inet dhcpinto your /etc/network/interfaces file? I guess they have been eliminated in favor of the WiFi customization, which is what most people seem to be using. In your case you can comment out all the WLAN stuff to speed up boot time.@jwischka: Could you tell us how to disable the "auto login" feature? When I start up the board with a video-enabled kernel and a console attached, I get logged into the olinuxino account with full superuser privileges. For initial configuration this may be what you want, but in the long run it's a bit too much power without password for my taste. I was looking for the /etc/lightdm/lightdm.conf file to edit to disable it, but there is no such file, not even such a directory. The older /etc/gdm directory with the gdm.conf file does not exist either. So I am running out of ideas.
Quote from: Ekkehard on June 26, 2013, 01:33:47 AMYup - that is exactly what I am seeing. I did install a bunch of stuff (gawk, realpath, apache2, php5, php5-cgi, calibre), but I am not aware that I changed anything other than /etc/hostname and /etc/hosts to change the host name and of course /etc/network/interfaces to get my USB Ethernet adaptor to work. If you are not seeing this - I'll start over with a fresh install directly from your image. Maybe I was doing something else without noticing.....Thanks for the very prompt response!!!
mkdosfs -F 32 -v -I /dev/sdddd bs=4M oflag=sync if=olinuxino_xfce-r18.img of=/dev/sdd