Welcome, Guest

Poll

UART DEBUG not working

UART DEBUG not working
0 (0%)
can't change output hdmi resolution
0 (0%)

Total Members Voted: 0

Author Topic: Can't start working with my RK3188-SOM-EVB  (Read 2500 times)

Laskov Constantine

  • Newbie
  • *
  • Posts: 13
  • Karma: +1/-0
Can't start working with my RK3188-SOM-EVB
« on: January 17, 2016, 12:38:51 AM »
For a whole last week I struggling with several issues with my RK3188-SOM-EVB.
I posted it in another branch of this forum, but finally I decided to publish it on my web site.
Everybody welcome:
http://microelk.azurewebsites.net/RK3188/RK3188

Laskov Constantine

  • Newbie
  • *
  • Posts: 13
  • Karma: +1/-0
Re: Can't start working with my RK3188-SOM-EVB
« Reply #1 on: March 20, 2016, 03:36:48 AM »
Thank you for nothing dear Olimex technical support.
I resolved all my issues:
http://microelk.azurewebsites.net/
Look here for the series of articles.

B.R.
Constantine.

jollyp

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
Re: Can't start working with my RK3188-SOM-EVB
« Reply #2 on: February 08, 2017, 04:54:45 PM »
Thank you for nothing dear Olimex technical support.
I resolved all my issues:
http://microelk.azurewebsites.net/
Look here for the series of articles.

B.R.
Constantine.

Quick question, do you know how to direct the boot sequence to boot off SD Card vs. the NAND flash? It seems to always default to NAND flash, even when I insert the SD Card.