Text only | Text with Images

Olimex Support Forum

OLinuXino Android / Linux boards and System On Modules => RK3188 => Topic started by: Laskov Constantine on January 17, 2016, 12:38:51 AM

Poll
Question: UART DEBUG not working
Option 1: UART DEBUG not working votes: 0
Option 2: can't change output hdmi resolution votes: 0
Title: Can't start working with my RK3188-SOM-EVB
Post by: Laskov Constantine on January 17, 2016, 12:38:51 AM
For a whole last week I struggling with several issues with my RK3188-SOM-EVB.
I posted it in another branch of this forum, but finally I decided to publish it on my web site.
Everybody welcome:
http://microelk.azurewebsites.net/RK3188/RK3188
Title: Re: Can't start working with my RK3188-SOM-EVB
Post by: Laskov Constantine on March 20, 2016, 03:36:48 AM
Thank you for nothing dear Olimex technical support.
I resolved all my issues:
http://microelk.azurewebsites.net/
Look here for the series of articles.

B.R.
Constantine.
Title: Re: Can't start working with my RK3188-SOM-EVB
Post by: jollyp on February 08, 2017, 04:54:45 PM
Quote from: Laskov Constantine on March 20, 2016, 03:36:48 AM
Thank you for nothing dear Olimex technical support.
I resolved all my issues:
http://microelk.azurewebsites.net/
Look here for the series of articles.

B.R.
Constantine.

Quick question, do you know how to direct the boot sequence to boot off SD Card vs. the NAND flash? It seems to always default to NAND flash, even when I insert the SD Card.
Text only | Text with Images