Welcome, Guest

Author Topic: AVR ISP MK2 firmware  (Read 2813 times)

PeteBux

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
AVR ISP MK2 firmware
« on: December 17, 2015, 11:43:34 AM »
Hi,

According to your information on this website, I tried to upgrade the firmware of my AVR ISP MK2 with the avrdude firmware version: Installed AtmelFlip, upgraded with the downloaded file \Firmware_Drivers\FIRMWARE-FOR-AVRDUDE-LIBUSB\libUSB-AVRISP-MKII.hex and restarted the device, the drivers got reinstalled by Windows. Now it always lights up the RED led :-[. It seems I cannot flash it back to the original firmware.

How can I get this back OK ?
« Last Edit: December 18, 2015, 12:05:34 PM by PeteBux »

LubOlimex

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1713
  • Karma: +43/-2
Re: AVR ISP MK2 firmware
« Reply #1 on: January 12, 2016, 01:38:33 PM »
Hey PeteBux,

Thank you for the report.

Try to update the firmware now. There is a hex from the 7th of January 2016. The LEDs should behave properly now.

Best regards,
Lub/OLIMEX
Technical support and documentation manager at Olimex

patrickf

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
Re: AVR ISP MK2 firmware
« Reply #2 on: April 05, 2017, 07:21:21 PM »
HI

I also want to reload the firmware for the libusb-win32 drivers and so far have failed to find it on the Olimex website.

Can you give me a link for it?

patrickf

LubOlimex

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1713
  • Karma: +43/-2
Re: AVR ISP MK2 firmware
« Reply #3 on: April 07, 2017, 11:27:25 AM »
Refer to page 9 of the user's manual. There is a picture that shows how the programmer looks in Windows 10's device manager. Do you see how it is listed? As libusb-win32. The unit comes with libusb-win32 firmware. So what exactly are you looking for?


Technical support and documentation manager at Olimex