Welcome, Guest

Author Topic: Off-board power switch  (Read 1901 times)


  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
Off-board power switch
« on: January 09, 2015, 04:16:00 AM »
Does anyone know if it's possible to hook up an off-board PWR switch to the A10-OLinuXino-LIME without hacking the board? I've looked at the schematics and docs and didn't see anything to suggest that this is a provided feature, but I might have missed something.


  • Hero Member
  • *****
  • Posts: 624
  • Karma: +18/-0
Re: Off-board power switch
« Reply #1 on: January 09, 2015, 04:23:16 AM »
This is a recurring issue with almost all of the boards. I use the A20 and it's the same.

Your only option is to add a hack. I solder a wire to the board switch and connect this to a Molex 2 pin KK type connector and this then connects to my carrier board.

@Olimex. You need to bring the power switch to an external connection point on future boards?


  • Newbie
  • *
  • Posts: 43
  • Karma: +0/-0
Re: Off-board power switch
« Reply #2 on: July 04, 2016, 06:43:00 PM »
I'm really interested in this feature as well. Are you planning to add a PIN for the switch ?