Started by Chudik, May 29, 2014, 10:06:07 pm
Trying to open COM4 at 500000 bps...Resetting Olimex command processor...Initializing FET...FET protocol version is 10004002Set Vcc: 3300 mVConfigured for JTAG (2)fet: FET returned error code 4 (Could not find device or device not supported)fet: command C_IDENT1 failedUsing Olimex identification procedureDevice ID: 0xf249 Code start address: 0x2100 Code size : 57088 byte = 55 kb RAM start address: 0x200 RAM end address: 0x9ff RAM size : 2048 byte = 2 kbDevice: MSP430F2410Number of breakpoints: 3fet: FET returned error code 34 (Not supported by selected interface or interface is not initialized)fet: warning: message C_IDENT3 failedfet: FET returned NAKwarning: device does not support power profilingChip ID data: f2 49Bound to port 2000. Now waiting for connection...Client connected from 127.0.0.1:59208Clearing all breakpoints...
Quote1. Is it normal that it tries to open COM4 at 500000 bps.
QuoteIs it true that both test boards work with IAR and MSP430-JTAG-TINY-V2?