March 28, 2024, 01:27:17 PM

ARM-USB-OCD-H Windows 7 64 bit Driver

Started by Billingham, October 30, 2012, 06:43:59 PM

Previous topic - Next topic

Billingham

I need to install the 64 bit driver for windows 7 x64. Where can I find the drivers.

LubOlimex

Hello Billingham,

The drivers can be downloaded directly from:
https://www.olimex.com/Products/ARM/JTAG/_resources/OpenOCD_OnlinePackage_v1.1.zip

There are two sets of drivers in the package:

1) LibUSB drivers - suitable for OpenOCD and our Olimex ODS eclipse-based IDE - they are found in fold olimex-libusb-1.2.2.0

2) FTDI ones - suitable for Rowley Crossworks and CooCoX IDE - located in CDM20808

Depending on the  environment you want to use you should point the driver updated from device manager to the respective folder for each interface that shows up in your manager after you plug ARM-USB-OCD-H in your computer.

Please also check the helpful step-by-step guide here: https://www.olimex.com/Products/ARM/JTAG/_resources/Installing-OpenOcd-Rev.G-drivers-for-Windows-7.pdf

Best regards,
Lub/OLIMEX
Technical support and documentation manager at Olimex