I need to install the 64 bit driver for windows 7 x64. Where can I find the drivers.
Hello Billingham,
The drivers can be downloaded directly from:
https://www.olimex.com/Products/ARM/JTAG/_resources/OpenOCD_OnlinePackage_v1.1.zip (https://www.olimex.com/Products/ARM/JTAG/_resources/OpenOCD_OnlinePackage_v1.1.zip)
There are two sets of drivers in the package:
1) LibUSB drivers - suitable for OpenOCD and our Olimex ODS eclipse-based IDE - they are found in fold olimex-libusb-1.2.2.0
2) FTDI ones - suitable for Rowley Crossworks and CooCoX IDE - located in CDM20808 (http://cdm20808)
Depending on the environment you want to use you should point the driver updated from device manager to the respective folder for each interface that shows up in your manager after you plug ARM-USB-OCD-H in your computer.
Please also check the helpful step-by-step guide here: https://www.olimex.com/Products/ARM/JTAG/_resources/Installing-OpenOcd-Rev.G-drivers-for-Windows-7.pdf (https://www.olimex.com/Products/ARM/JTAG/_resources/Installing-OpenOcd-Rev.G-drivers-for-Windows-7.pdf)
Best regards,
Lub/OLIMEX