PE16/POWERON PIN with 1k resistor keeps rebooting

[mauricio]

Hello.

After discovering the PE16 pin 37 at GPIO has R65, but no R28, I solder one there

Now when connect GND to pin 37, A64 poweroff, but reboot. I would like it remain off

Is there's something else to do to achieve a poweroff with PE16 ?

Thanks

[LubOlimex]

No idea, it should be explained in AXP803 datasheet.

Did you keep the PWRON to GND all the time? If you release the GND connection the AXP803 is supposed to boot.