Can the ESP32-POE be powered by 3V3 ?

Started by pines, July 17, 2020, 03:42:52 PM

Previous topic - Next topic

pines

Hi,

Can the ESP32-POE be powered by 3V3?

On the GPIO map available on the Olimex website only power via 5V is mentioned, but I could not find any info about 3V3.
The use case would be using an external 3V3 PSU/regulator for power and the Ethernet jacket only for data, so no PoE.

Thanks!

LubOlimex

No, you can't power it with 3.3V of voltage.

You can power it with 5V of voltage. Either at the GPIO pins at the micro USB.
Technical support and documentation manager at Olimex