Unable to program MSP430FR5969 (rev F) using OLIMEX MSP430-DLL drivers 2.007

Started by Chester Gillon, March 27, 2015, 06:26:10 PM

Previous topic - Next topic

Chester Gillon


Using a MSP430-JTAG-ISO-MK2 or a MSP430-JTAG-TINY-V2, with OLIMEX MSP430-DLL drivers 2.007, I have been unable to a program a MSP430FR5969 rev F device. The problem is:
1) CCS 6.1 reports a verification failure after programming.


2) Elprotronic Fet-Pro430 3.3-0 reports a verification failure after programming. On reading back the main memory after a failure the contents is shown as:



=== Information Memory Segments  0x1800 - 0x19FF ======


0x1800:       ------- b l a n k ----(all 0xFF)-------




0x18B0: FF FF FF FF FF FF FF FF   F1 FF FF FF FF FF FF FF | ................
0x18C0:       ------- b l a n k ----(all 0xFF)-------




========== Main Memory Segments  0x4400 - 0x13FFF ======


0x4400:       ------- b l a n k ----(all 0xFF)-------




===== Extended Main Memory Block #1  (0x10000-0x13FFF) =====


0x10000:       ------- b l a n k ----(all 0xFF)-------


The program only contains data in the main memory, but the after a failure to program there is one byte which has been programmed in information data memory, but the entire main memory is blank.


The MSP430FR5969 rev F device can be programmed with a TI MSP-FET430-UIF and the Olimex MSP430-JTAG-ISO-MK2 and MSP430-JTAG-TINY-V2 can program different devices. Therefore, it looks like the Olimex OLIMEX MSP430-DLL drivers 2.007 don't correctly program a MSP430FR5969 device.

LubOlimex

Hey,

MSP430FR5969 devices are not supported by the drivers yet.

The list of supported devices is published on the web page of the debuggers. It is available here: https://www.olimex.com/Products/MSP430/JTAG/_resources/tiny-v2-supported-mcus.txt

Best regards,
Lub/OLIMEX
Technical support and documentation manager at Olimex

Chester Gillon

Quote from: LubOlimex on April 01, 2015, 12:09:49 PMMSP430FR5969 devices are not supported by the drivers yet.

The list of supported devices is published on the web page of the debuggers. It is available here: https://www.olimex.com/Products/MSP430/JTAG/_resources/tiny-v2-supported-mcus.txt
Thanks for the update. What confused me is that the supported_msp430.txt file in the https://www.olimex.com/Products/MSP430/JTAG/MSP430-JTAG-ISO-MK2/resources/OLIMEX_MSP430-DLL_drivers.zip lists the MSP430FR5969 device, which made me think the device was supported.