Welcome, Guest

Author Topic: PIC-WEB NEW  (Read 2404 times)

hasansavun

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
PIC-WEB NEW
« on: February 26, 2013, 05:11:55 PM »
Hi,

Im new user. i want to buy pic web. But i dont now use. please help me.

how sent to web page temp sensor value from pic?
can you say e-book,web page,forum for pic web information?

Tahnk you.

LubOlimex

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1984
  • Karma: +50/-3
Re: PIC-WEB NEW
« Reply #1 on: March 28, 2013, 01:01:35 PM »
Hello hasansavun,

PIC-WEB has built-in temp sensor which send data on the web page of the demo example. The latest example is:
https://www.olimex.com/Products/PIC/Development/PIC-WEB/resources/PIC_WEB_5_42.zip

The web page of PIC-WEB is: https://www.olimex.com/Products/PIC/Development/PIC-WEB/

I'd also recommend checking the documentation provided by Microchip (since our examples are based on their software stack).

Best regards,
Lub/OLIMEX
Technical support and documentation manager at Olimex

marc

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
Re: PIC-WEB NEW
« Reply #2 on: May 19, 2013, 09:57:23 PM »
Hello,

The demonstration given PIC-WEB Demo.mcp is very difficult to understand.
Have you any very simple example to start?

LubOlimex

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1984
  • Karma: +50/-3
Re: PIC-WEB NEW
« Reply #3 on: May 22, 2013, 10:47:42 AM »
Hey marc,

Unfortunately we don't have simpler example. However, if you find any example for the microcontroller inside (PIC18F67J60) it should be compatible. Generally a good place to start is the documentation in the Microchip's Application Libraries (we used big part of the TCP/IP stack examples inside, just "calibrated" them for the PIC-WEB board).

Best regards,
Lub/OLIMEX
Technical support and documentation manager at Olimex