Olimex AVR-ISP-MK2 with BASCOM-AVR IDE

Started by vloeby, March 01, 2023, 01:42:58 PM

Previous topic - Next topic

LubOlimex

Driver looks alright. What about he hardware connection between AVR-ISP-MK2 and the target? Which connector do you use for the connection? Target is ATtiny25 - what is the programming interface of that chip?

Did you also test with Atmel Studio just to confirm if the issue is specifically with Bascom?
Technical support and documentation manager at Olimex

vloeby

The hardware is okay. But i messed with loading the hex files.
So i restarted all over again.
Fist loaded from Olimex AVR-ISP-MK2-firmware-windows drivers.zip and then extracted everything ( which i didn't not well ).
Then following the procedure from the manual: 4.2.1 changing firmware for windows users.
On point 5. file >hex files > AVRDUDE / arduino / libusb >
libusb-AVRISP-MKII.hex

At the end, everything was working fine.!!!

Thanks for always patiently replying.