November 04, 2024, 01:51:57 PM

ESP32 PoE ISO - using pin 34

Started by RobLatour, January 21, 2023, 08:15:09 PM

Previous topic - Next topic

RobLatour

The gpio map for the ESP32 PoE ISO board:
https://www.olimex.com/Products/IoT/ESP32/ESP32-POE-ISO/resources/ESP32-POE-ISO-GPIO.png

says "GPI34 is connected to button and has 10K pullup".

For clarity, does that mean I can connect an external button with one terminal to pin 34 and the other terminal to ground (without the need for a 10k resistor) and when I press the external button it will work (without damaging anything).


LubOlimex

You can do that and you will have two buttons doing the same thing - the one you added and the on-board one.
Technical support and documentation manager at Olimex

RobLatour

Thanks - that is exactly what I want, the other is an external button mounted on a case.