Started by bluepr0, January 01, 2023, 01:57:45 pm
i2c: - id: bus_a sda: GPIO16 scl: GPIO15 scan: trueuart: - id: uart_two rx_pin: GPIO3 #19 tx_pin: GPIO4 #18 baud_rate: 9600 - id: uart_mmwave tx_pin: GPIO14 rx_pin: GPIO13binary_sensor: - platform: gpio pin: number: GPIO33 mode: INPUT_PULLDOW - platform: gpio id: mmwave device_class: occupancy pin: number: GPIO32 mode: INPUT_PULLDOWN
ethernet: type: LAN8720 mdc_pin: GPIO23 mdio_pin: GPIO18 clk_mode: GPIO17_OUT phy_addr: 0 power_pin: GPIO12
Quote from: LubOlimex on January 03, 2023, 10:00:50 amThanks for the share! This is very cool and looks nice but if you want to power from PoE and USB maybe consider ESP32-PoE-ISO instead. ESP32-PoE might get damaged if you have PoE power and USB power applied SIMULTANOUSLY!