About the DAP for Olimexino-STM32 board

Started by ShihWen, February 25, 2022, 07:35:12 am

Previous topic - Next topic

ShihWen

Dear Sirs,
  I use ULINK2 to connect with my Olimexino-STM32 board. The chip is STM32F103RBTb. It seems there are 2 devices (ID: 0x3BA00477 ARM CoreSight JTAG-DP and 0x16410041 ST TMC).
May I learn several questions?
1. I click the download button on Keil, the axf file has been downloaded to STM32F103RBTb. After that, the ULINK2 could not detect the devices. What problem is happened?

2. what ISP tool could I use to download the hex or binary file into flash of STM32F103RBTb?


BR,
Eddie

LubOlimex

1. I guess some of the settings in your software are improper. It might be better idea to contact ULINK2 forums or Keil forums for people that had similar problem. They would know what exactly should be the settings.

2. STM32CubeProgrammer has replaced the FLASHER-STM32 for programming via the bootloader. It is the recommended tool for programing STM32 chips without a programmer.

Technical support and documentation manager at Olimex