October 14, 2024, 01:36:58 AM

ESP32_EVB can

Started by campestring, January 08, 2021, 12:52:08 PM

Previous topic - Next topic

campestring

Hello, on the eval board of OLIMEX : esp32-evb, CAN_TX and CAN_RX are connected to GPIO5 and GPIO35.
I am trying to understand why these pins ? Is it possible for a custom board to use others pins to connect the CAN?
Or the GPIOs 5 and 35 are dedicated to the CAN bus ? Thank you for your time.

Best regards,

Brian

CAN_TX and CAN_RX can be any GPIO