PlatformIO: ESP32_GATEWAY Ethernet phy timeout - solved !

Started by harob, October 09, 2020, 06:31:23 PM

Previous topic - Next topic

harob

Hi,
with the Arduino IDE the sample sketch  ETH_LAN8720.ino works fine, but using platformIO with Arduino Framework the same sketch outputs error messages:

(1050) emac: Timed out waiting for PHY register 0x2 to have value 0x0007(mask 0xffff). Current value 0xffff
E (2051) emac: Timed out waiting for PHY register 0x3 to have value 0xc0f0(mask 0xfff0). Current value 0xffff
E (2052) emac: Initialise PHY device Timeout
Board type Rev. G

any idea what is reason ?

harob

Problem is solved. I've checked the Arduino ESP32 include file pins_Arduino.h for the esp32-gateway, so there is 1 define for board revision 'D' and above

#define ETH_CLK_MODE ETH_CLOCK_GPIO17_OUT

which i've added in the demo sketch ETH_LAN8720. Now ethernet is working  ;)