Buster not possible to set LCD

Started by Acse, September 19, 2020, 06:48:10 PM

Previous topic - Next topic

Acse

Hi Everyone,

I try to set up LCD on A10 with http://images.olimex.com/release/a10/ buster_base image. It failed the uboot way and the olinuxino-display way.

Any suggestion?

Thanks in advance!

Regards,

Acse

LubOlimex

This is correct. Currently there is no LCD output support for A10 boards in the mainline images. It is in our TODO list, we are working on it.
Technical support and documentation manager at Olimex

ottosr

Any progress here? Can't wait to use my lcd again.

tropek

I hope the wait will not be in vain.
In the meantime, is there an alternative (constructed) image (I haven't seen one with stretch for example)?

I hope, hope, hope . . .  ;D
DeepL translation

LubOlimex

I don't know what are you taking about. LCD displays work with latest images for A10.

If your display doesn't start, then run script:

olinuxino-display

to enable your display.
Technical support and documentation manager at Olimex

tropek

OK, I will try again this week with more constructive questions.

Merci !
DeepL translation

tropek

#6
Hello

Everything works, the problem was me.
When the LCD and HDMI connectors are connected, with the HDMI monitor turned off, the LCD display is disturbed.
EDIT
But when both connectors are plugged in, both displays powered, the output set to hdmi,
then the hdmi display is not disturbed.

Quote from: LubOlimex on March 05, 2021, 04:46:49 PMIf your display doesn't start, then run script:
olinuxino-display
to enable your display.
All that remains is to indicate this in the user manual.

best regards

PS - since you are here, if someone wanted to look at https://www.olimex.com/forum/index.php?topic=8102.0
DeepL translation