March 28, 2024, 01:21:43 PM

ESP32 -Gateway

Started by humble_pie, July 04, 2020, 02:55:32 PM

Previous topic - Next topic

humble_pie

Hi,


I have very frustrating error on my ethernet, I am using example sketch for which comes with Arduino using internal clock.


Whats interesting is when I connect the ethernet I can see both the leds on ethernet jack, and the chip is getting the power, I have checked the clock signal using a scope and I can see decent 50 MHZ signal.

The board is using 8710A chip, the log of my error is given below.


E (1045) emac: Timed out waiting for PHY register 0x2 to have value 0x0007(mask 0xffff). Current value 0xffff
E (2045) emac: Timed out waiting for PHY register 0x3 to have value 0xc0f0(mask 0xfff0). Current value 0xffff
E (2045) emac: Initialise PHY device Timeout
[E][ETH.cpp:101] begin(): esp_eth_enable error: -1

JohnS

Seems a common error with many boards, not just Olimex.

John

LubOlimex

Technical support and documentation manager at Olimex