no connection between IMX27 and Olimex Arm Tiny-H over OpenOCD

Started by Akdemir, May 29, 2018, 11:16:33 am

Previous topic - Next topic

Akdemir

Hello everybody,
I have a connection between my target iMX27 and programmer Olimex Arm Tiny-H over OpenOCD.
After programming the Bootloader (including Verify) and restart of the target, access via JTAG is no longer aviable.

Following commands will be used in the OpenOCD after resart of target:
reset halt
halt


Does anyone have the same problems?