fw_printenv not working

Started by FinistSeb, October 17, 2017, 07:51:11 PM

Previous topic - Next topic

FinistSeb

Hello,

I'm trying to use fw_printenv on A64 but I got only
Warning: Bad CRC, using default environment

The u-boot env is saved

sunxi#saveenv
Saving Environment to FAT...
[mmc]: Has init
[     10.813]---drivers/mmc/mmc.c 2733 mmc_init
writing uboot.env
done


/etc/fw_env.config exists with this values
/dev/mmcblk1 0x953000 0xF0000

But I still have the warning.
As offset address I took 19096 * 512
As length 0xF0000 -> 983040 oct.  12 14:54 u-boot-sun50iw1p1-secure-with-teres-dtb.bin

Thanks in advance for any info!
Sébastien