Dimensions of RT5350F-OLinuXino-EVB?

Started by waterguy, November 12, 2016, 11:45:09 am

Previous topic - Next topic


What are the dimensions of the RT5350F-OLinuXino-EVB please?  I can't find it anywhere.



You can get it from the PCB design if you clone the HW git repository from GitHub:https://github.com/OLIMEX/OLINUXINO/tree/master/HARDWARE/RT5350F and open the corresponding .brd file.
Zoltan Gyarmati


The nominal dimensions of the EVB part are: (4000 x 2500)mils ~ (10.16 x 6.35)cm.

Other than that - what zgyarmati wrote: it is relatively easy to take every 2D measure you want with the latest Eagle software (mainly since both boards in question are open-hardware board and the hardware source files are available to you). You can download and open the hardware sources with the latest Eagle CAD software (the freeware version/license is enough) and take any measure with the "Draw a dimension" tool. The measurements should be done in the .brd file of the board design - a good idea would be to disable some of the layers for better visibility of the measurement (from Layer settings... -> Display and click to enable/disable layers).

Best regards,
Technical support and documentation manager at Olimex