Welcome, Guest

Author Topic: Dimensions of RT5350F-OLinuXino-EVB?  (Read 2054 times)


  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
Dimensions of RT5350F-OLinuXino-EVB?
« on: November 12, 2016, 11:45:09 AM »
What are the dimensions of the RT5350F-OLinuXino-EVB please?  I can't find it anywhere.



  • Newbie
  • *
  • Posts: 33
  • Karma: +2/-0
    • https://zgyarmati.de
Re: Dimensions of RT5350F-OLinuXino-EVB?
« Reply #1 on: November 13, 2016, 12:05:27 PM »
You can get it from the PCB design if you clone the HW git repository from GitHub:https://github.com/OLIMEX/OLINUXINO/tree/master/HARDWARE/RT5350F and open the corresponding .brd file.
Zoltan Gyarmati


  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1967
  • Karma: +50/-3
Re: Dimensions of RT5350F-OLinuXino-EVB?
« Reply #2 on: November 16, 2016, 08:18:43 AM »
The nominal dimensions of the EVB part are: (4000 x 2500)mils ~ (10.16 x 6.35)cm.

Other than that - what zgyarmati wrote: it is relatively easy to take every 2D measure you want with the latest Eagle software (mainly since both boards in question are open-hardware board and the hardware source files are available to you). You can download and open the hardware sources with the latest Eagle CAD software (the freeware version/license is enough) and take any measure with the “Draw a dimension” tool. The measurements should be done in the .brd file of the board design - a good idea would be to disable some of the layers for better visibility of the measurement (from Layer settings... -> Display and click to enable/disable layers).

Best regards,
Technical support and documentation manager at Olimex